¶ Download
https://bitbucket.org/malhan-designs/x301-mods/src/master/Lighted Bed Mounts - Extended/
PLEASE NOTE: The STL files in this folder are only compatible with 2 Z screw x301 builds. If you are building a 3 Z model, please use the STL files for the bed that are included in the 3 Z folder.
Created for the LayerFused Lighted Bed Kit: https://shop.layerfused.com/collections/featured/products/neopixel-lighted-bed-kit?aff=2
Derived from: https://bitbucket.org/makersmashup/x301-models/src/master/Fusion/Bed Mount Lighted.f3d
¶ Changes from Original Design
- Moves the LED strips up and away from the bed a bit to cast more light onto the bed and improve clearance from hotend.
- Increases the space on the inner back of the slot to allow the LED strip to be adhered more uniformly to the mount.
- Increases the diameter of the hole at the bottom of the mount for the wiring.
There are two versions, both increase the maximum elevation of the LEDs by 15mm:
- Extended - This one increases the overall height allowed for the LEDs by 15mm so you could use a longer strip than what's included in the kit.
- Extended Raised - This one raises the baseline for the LEDs, keeping the maximum length of the LED strip the same as what is included in the kit.
¶ Example Images
¶ Extended
¶ Extended & Raised
